BF Cylinder FC Series

---

1. Pneumatic Products
2. Fujikura Composites
3. BF Cylinder FC Series

Download PDF (1.180,6 Kb)

---

・Standard type of BF Cylinders, available in a wide range of bore sizes from φ10 to 200mm.

・Each size of cylinders is available both in single-push action and double action models, except that single action models only for bore smaller

Specifications
Model	Single Action(Push) / Double Action
Cylinder Bore　mm	10 to 200
Stroke　mm	6 to 320
Working Fluid	Compressed Air ( Non-lubricated )
Range of Working Pressure　MPa	0.01 to 0.7 (※1)
Range of Working Temperature　℃	0 to 60
Rod Bearing	Oil impregnated metal (Dry Bearing)
Mounting ( for Cylinders of bore not less than φ25mm)	Rear Flange, Front Flange, Pivot, Trunnion, L-Mount

※1：0.02 to 0.7MPa for double action Cylinders of φ25 mm bore size only.

Nominal Size Table of Model FCS- and FCD- Cylinders

FCS- Bore Stroke 10 6 12.5 11 16 10 16 20 8 22 FCS-FCD Bore Stroke 25 6 16 26 31.5 14 24 35 40 8 24 36 48 50 16 36 50 64 63 16 42 59 78 FCS-FCD Bore Stroke 80 30 62 87 108 100 46 85 115 144 112 42 88 122 156 125 52 102 140 178 FCS-FCD Bore Stroke 140 62 122 162 204 160 82 142 192 240 180 96 168 226 280 200 112 192 256 320 Note : Model FCS-and FCD- Cylinders of bore not less than φ125 are customized ad options only. You are advised to contact our Control Products Section about the necessary delivering time.

Ordering Information

FCD	－	100	－	144	－	S0	－	P
①		②		③		④		⑤

①		②	③	④
Action		Bore	Stroke	Spring
FCS	Single Action			None	Double Action
FCD	Double Action			S0	Spring - less
				S1	Standard Spring

⑤
Mounting
None	Body
L	Ell
F	Front Flange
R	Rear Flange
T	Trunnion
P	Pivot