The Nex Flow™ Ion Blaster Beam™ neutralizes static electricity and can remove static free dust up to 15 feet (4.6 m) away with no moving parts. It’s compact design allows it to be used in hard to reach areas or confined spaces. The air volume and velocity are infinitely adjustable over a wide range using a pressure regulator to address any application from light to heavy duty. The use of an “air amplifier” (Model AM40) maximizes ionized airflow with large volume entrained while minimizing the use of compressed air.
In most applications only 10 psig (0.7 bar) is required to operate effectively. The Ionizing Point is a powerful ionizer which remains effective because the air exit “plastic PET head” of the unit prevents weakening if ions which metal attachments may do. This can make the Ion Blaster Beam™ far more effective than systems using metal.
Certification: North American Power Supplies certified to UL and CSA standards and Spot Ionizer used with the Ion Blaster beam is included with the certification. European Power Supplies CE approved and Spot Ionizer used with the Ion Blaster Beam is included with the certification. Stainless steel emitters on the ionizer.
Electrical: For use with 7 kV rms, 5 milliamperes (max) power supply which will last much longer than 5 kv power supplies.
Electrical Hazard: Shockless (less or eualt to 5mA)
Maximum Ambient Temperature: 122 degrees F or 50 degrees C.
| Part # | Description |
| 17040 | Ion Blaster Beam™ includes Air Amplifier, Spot Ionizers, Stand and 2 meters shielded cable |
| 17140 | Ion Blaster Beam™ and Power Supply |
| 17340 | Ion Blaster Beam™ Kit (c/w Ion Blaster Beam™, Power supply, Model 90001 water removal filter and Model 90008 regulator wi. gauge |
| 80111 | 120 V Power Supply, 2 outlet |
| 80121 | 230 V Power Supply, 2 outlet |
| 80112 | 120 V Power Supply, 4 outlet |
| 80122 | 230 V Power Supply, 4 outlet |
| 90001 | Water Removal Filter c/w auto Drain |
| 90008 | Regulator with gauge |
Ion Blaster Beam™ power supplies are available in various models including a unit that will monitor the static bars for effectiveness.
| Voltage | Model# | Description |
|---|---|---|
| 110V | ENC-110/2 | Two outlet (Can connect two static bars) |
| 220V | ENC-220/2 | Two outlet (Can connect two static bars) |
| 110V | ENC-110/4 | Four outlet (Can connect four static bars) |
| 220V | ENC-220/4 | Four outlet (Can connect four static bars) |
| 110V | Multistat 110 | Four outlet (Can connect four static bars, plus monitors performance. Can be connected into a system alarm or indicating light.) |
| 220V | Multistat 220 | Four outlet (Can connect four) |