· MCG3
Tube I.D. φ63, 80 (mm). Three guide rods equally spaced enable consistent movement even when uneven load is applied.
· MCDA
Tube I.D. φ 6, 12, 16, 20, 25, 32 (mm). Compact in width and length with precision guidance. High lateral loads can be applied on both slide and linear bearing unit.
· MCDJ
Tube I.D. φ 6, 10 (mm). Compact in width and length with precision guidance. High lateral loads can be applied on both slide and linear bearing unit.
· MCSS
Tube I.D. φ 6, 8, 12, 16, 20, 25 (mm). High precision combination of cylinder and linear rail. Flush fitting sensor groove.
· MCSQ
Tube I.D. φ 6, 8 (mm). High precision combination of cylinder and linear rail. Flush fitting sensor groove.
· MCSF
Tube I.D. φ 5.2, 8, 12, 16, 20 (mm). Parallel design of guide and cylinder creates a slim and compact slide. The reduction of the height is about 1/3. Grooves on the body for sensor switch to be inserted into.
· MCSH
Tube I.D. φ6, 10, 16, 20 (mm). Compact precision cylinder. Cylinder can take high lateral loads and is also non rotating. Cylinder can be mounted in 3 or 4 positions. Magnetic as standard.
· MCRPL
Tube I.D. φ 16, 25, 32, 40, 50, 63 (mm). 50% space saving when compared to conventional cylinders. Multi ported endcaps as standard.
· MCRPLK
Tube I.D. φ16, 25, 32, 40 (mm), 50% space saving when compared to conventional cylinders. End caps with 3 air connections and adjustable cushioning. Load strength is higher than MCRPLF series (about 4 Multiple).
· MCRPLS
Tube I.D. φ 32, 40, 50, 63 (mm). High resistance to wear. Low weight. Ability to take high loads & moments in all directions & shock loadings & vibrations against blows and vibrations.
· MCRPM
Tube I.D.: φ 10, 15, 20, 25, 32, 40 mm, 50 % space saving. Magnetic transit design. Magnetic force transits the movement with piston side magnet and silder magnet. Stainless tube, light weighted and durable.
· MCRPMD
Tube I.D. : φ10, 15, 20, 25, 32 mm, 50 % space saving. Magnetic transit design. Magnetic force transits the movement with piston side magnet and silder magnet. Stainless tube, light weighted and durable.
· MCRPMS
Tube I.D. : φ10, 15, 20, 25, 32 mm, 50 % space saving. Magnetic transit design. Magnetic force transits the movement with piston side magnet and silder magnet. Stainless tube, light weighted and durable.
· MSBR
Tube I.D. φ 20, 32, 40, 50 (mm)，Vertical moutning type. Built-in roller.
· MSBS
Tube I.D. φ 20, 32, 50 (mm). Vertical mounting type.
· MSAR
Tube I.D. φ 32, 50, 80 (mm)，Vertical mounting type. Built-in roller. Non-magnetic.
· MSLP
Tube I.D. φ 32 (mm). Horizontal mounting type.
· MSLL
Tube I.D. φ 25, 40 (mm). Horizontal mounting type. Built-in roller.
· MSLD
Tube I.D. φ 50 (mm). Horizontal mounting type. Built-in roller and shock absorber. High damping performance.
· MCRA
Tube I.D. φ 63 (mm), Easy to adjust sensor position, High allowable kinetic energy.
· MCRB
Bore size: φ 6, 20, 25, 32 (mm). Easy to adjust sensor position. Adjustable rotation range (0°~190°). Dual piston design with rack and pinion structure. Three mounting direction.
· MCRC
Size: 20, 30. Rotary angle 90°, 180°, 270°, Spin the rod with built-in vane mechanism, Three mounting directions.
· MCRQ
Tube I.D. φ 12, 16, 20, 25, 32, 40 mm. Adjustable rotation range (0°~190°). Dual piston design with rack and pinion structure. Built-in center hole and locating hole for postioning.
· MCRJS
Tube I.D. φ 6, 8 (mm).Easy to adjust sensor position, Adjustable rotation range (0°~190°), Dual piston design with rack and pinion, Three mounting direction.
· MRT
Tube I.D. φ 40, 63, 80 (mm). Rotation angle 90°, 180°. Adjustable rotation angle (±5°). High torque.
· MCKC
Tube I.D. φ12, 16, 20, 25, 32, 40, 50, 63 (mm). Space saving. Easy to adjust sensor position. Selectable clamping plate.
· MCKB
Tube I.D. φ25, 32, 40, 50, 63 mm. Lever type clamp cylinder gives high clamping force. Simple mounting of sensors on all four sides of body. Hard anodised body gives smooth lines and high corrosion resistance.